Vertical Milling Machine

Features

• Ruggedly built turret type milling head.

• The spindle is one piece machined from SCM-21 alloy steel, carburized, tempered and precision ground. The spindle runs on high precision P4 class bearings.

• Fitted with forced lubrication system for gears, clutch, and bearings inside the milling head for low noise running and long service life of head parts.

• The milling head can be swivelled 45° to the right and left. It is quickly locked and loosened by double screws and clamping ring.

• Constructed of high quality castings FC-30 and FCD-45, rib reinforced, tempered, and stress relieved for maximum rigidity without deformation.

• The table is manufactured from high quality cast iron FC-30. The table surface and slideways are tempered, high frequency hardened, and precision ground. The T-slots are precision machined. The 6 surfaces on 3 T-slots are precision ground to within 0.01mm accuracy in full way, permitting for fast milling operations.

• The X, Y axis feeds are driven by high precision C5 class preloaded double nut ball screws with tightening function, providing smooth feed, minimum backlash, and superior positioning accuracy.

• The X-axis feed is driven by a 1000W AC servo motor and the original driver, incorporated with a magnetic clutch for safe, powerful, fast, stable and quiet traverse. Automatic feed speed range is 0 - 1500 mm/min. Rapid feed speed as high as 3500 mm/min.

• An installation space is left for a Y-axis servo motor, providing convenient fitting at any time (OPTIONAL EQUOPMENT)

• The X, Y axis slideways, dovetailed surfaces and gibs are coated with Turcite-B, precision scraped for long term accuracy and maximum wear resistance.

• Precision chip wipers protect the X, Y and Z axis ways for scratch free traverse.

• The digitally displayed, timer controlled lubricator provides automatic lubrication to the X, Y, Z axis slideways, feed screws, gears and bearings. The oil supply time and lubrication interval can be set. An oil manifold ensures uniform lubrication to the parts.

 

Specifications

SPINDLE
Spindle speeds	60-3600 RPM VARIABLE SPEED (Max. 4050RPM)
Spindle nose taper	NST & ISO 40
Head tilt (R & L)	45° (R&L)
Overarm travel	410 mm
Quill travel	140 mm
Distance from spindle nose to table	0-530 mm
Distance from spindle center to column	170-580 mm
Automatic spindle feed speed	0.035 / 0.07 / 0.14 mm (PER REV.)
TABLE
Table area	1250 x 280 mm
Longitudinal travel	750 mm
Cross travel	400 mm
Vertical travel	440 mm
T-slot (Width x No. x Distance)	16 x 3 x 65 mm
Automatic lougitudinal travel	0-1500 mm/min
Quick lougitudinal travel	3500 mm/min
Quick vertical travel	1150 mm
MOTOR
Spindle	3.7 KW (5HP) VARIABLE SPEED MOTOR
Knee	0.75 KW (1HP)
Lubrication pump	75 W
Magnetic pump	13 W
PACKING
Machine dimentions	1900 x 2260 x 2305 mm
Packing dimentions	1460 x 1920 x 2030 mm
N.W.	2160 KG
G.W.	2320 KG

 

RUGGEDLY CONSTRUCTED COLUMN

• The column is manufactured from FC-30 high quality casting, tempered for maximum wear resistance and strain-free performance.

• Extremely powerful rib reinforcement for maximum rigidly, reducing vibration to the minimum.

 

ONE PIECE MACHINED PRECISION SPINDLE

• The spindle is precision manufactures from quality alloy steel SCM-21, carburized, tempered and precision P4 class bearings.

DIGITALLY DISPLAYED LUBRICATOR

• It provides unifprm lubrication to X, Y, Z-axes, feed screws, gears and bearings.

POWERED KNEE TRAVERSE

• The knee vertical travel is driven by a 1HP motor.

• Quick vertical travel speeds up to 1150mm per minute.

 

• The X and Y axis feeds are driven by high precision C5 class preloaded, double nut ball screws, providing smooth feed, minimum backlash and superior positioning accuracy.

• Control panel is conveniently located for operation ease.

• The longitudinal feed of the X-axis is driven by a servo motor for maximum operation convenuence.