Portable Magnetic Base Drilling Machine

PM-6025

SPEED CONTROL
The machine is design with low and high-speed options that allows the operator to make an appropriate choice for R.P.M.
TOOL ADAPTOR DESIGN
Serves as two modes of drilling that allows loading in "annular cutter" or "twist drill" etc.
DOUBLE COIL MAGNETIC BASE
When the power outage or any coil burning that still keeps another coil to avoid danger.
ROLLER BEARING
Lowes the cutter damage rate.
ARBOR SUPPORT BRACKET
Aligns the cutter precisely, increase cutter, motor life and less tool arbor vibration.
SWITCH PC BOARD
Regulate the voltage to avoid burning.
MAIN APPLICATION
Especially designed for general heavy duty machine or difficult to shift the objects such as skeleton of high building, H-structural steels, large steel plates, shaped bars, framework and other machinery, shipbuilding, bridges, reinforcements, construction materials and steam furnace etc hole drilling.
POWER & PERFORMANCE
Designed with the greatest possible consideration for lasting smooth powerful performance that reducing cutter crack probability to be lowers cutter cost.
Standard Accessories
1. MT-3 with annular cutter holder
2. Hand Drift
3. Pilot Pin 8 x 91 mm and 8 x 112 mm
4. Double Open End Wrench
5. Hex. Key Wrench 2.5mm, 4mm and 6mm
6. Operating Handle (3 pcs)
7. Lifting Handle
8. Carbon Brush
9. Fixed screw
10. Machine Manual
Optional Accessories
1. MT3 with Drill Chuck holder
2. Twist Drill
3. Noss Straight Shank Twist Drill
4. Annular Cutter (one touch or weldon shank)
18mm-60mm (for 35mm or 50mm thickness steel)
5. X-1 Cutting Oil : 2L / per can
6. Safety Chain

Specifications

Voltage (Single Phase)	100-120V AC 50/60 Hz	220-240V AC 50/60 Hz
Motor Rated Power Consumption	2,050W
Motor Rated Ampere	20A	10A
No-load Speed (2 speeds)	High Speed 720 rpm Dia. 13mm(1/2") ~ 35mm(1-3/8")
	Low Speed 450 rpm Dia. 36mm(1-7/16") ~ 60mm(2-3/8")
Tool Adaptor Inner Diameter	19.05 mm
Adjustable in height for max. stroke	150mm (without MT3:235mm(H), 85mm(L), with MT3:160mm(H), 10mm(L))
Coolant Supply	via Tool Holder
Magnet Power Consumption	85W
Magnet Adhesion	22,540N / 2,300kgf
Magnet Dimensions	210 x 100 x 64 mm
Weight	26 kg
HOLE-CUTTING CAPACITY
MT3 (Morse Taper) with annular cutter holder	Out Diameter	Plate Thickness
	18-60mm	6-50mm
MT3 (Morse Taper) with drill chuck holder	Jacobs Taper	Drill Chuck Max. Dia.
	JT6	Max. Dia. 16mm
Twist Drill	Max. Dia 25mm
Noss Straight Shank Twist Drill	Shank 1/2", Max. Outer Diameter 16mm

Portable Magnetic Base Drilling Machine

SPEED CONTROLThe machine is design with low and high-speed options that allows the operator to make an appropriate choice for R.P.M.

TOOL ADAPTOR DESIGNServes as two modes of drilling that allows loading in "annular cutter" or "twist drill" etc.

DOUBLE COIL MAGNETIC BASEWhen the power outage or any coil burning that still keeps another coil to avoid danger.

ROLLER BEARINGLowes the cutter damage rate.

ARBOR SUPPORT BRACKETAligns the cutter precisely, increase cutter, motor life and less tool arbor vibration.

SWITCH PC BOARDRegulate the voltage to avoid burning.

POWER & PERFORMANCEDesigned with the greatest possible consideration for lasting smooth powerful performance that reducing cutter crack probability to be lowers cutter cost.

Standard Accessories1. MT-3 with annular cutter holder2. Hand Drift3. Pilot Pin 8 x 91 mm and 8 x 112 mm4. Double Open End Wrench 5. Hex. Key Wrench 2.5mm, 4mm and 6mm6. Operating Handle (3 pcs)7. Lifting Handle8. Carbon Brush9. Fixed screw10. Machine Manual

Optional Accessories1. MT3 with Drill Chuck holder2. Twist Drill3. Noss Straight Shank Twist Drill4. Annular Cutter (one touch or weldon shank) 18mm-60mm (for 35mm or 50mm thickness steel)5. X-1 Cutting Oil : 2L / per can 6. Safety Chain

Specifications

Welcome to Taiwantrade.com

SPEED CONTROL
The machine is design with low and high-speed options that allows the operator to make an appropriate choice for R.P.M.

TOOL ADAPTOR DESIGN
Serves as two modes of drilling that allows loading in "annular cutter" or "twist drill" etc.

DOUBLE COIL MAGNETIC BASE
When the power outage or any coil burning that still keeps another coil to avoid danger.

ROLLER BEARING
Lowes the cutter damage rate.

ARBOR SUPPORT BRACKET
Aligns the cutter precisely, increase cutter, motor life and less tool arbor vibration.

SWITCH PC BOARD
Regulate the voltage to avoid burning.

POWER & PERFORMANCE
Designed with the greatest possible consideration for lasting smooth powerful performance that reducing cutter crack probability to be lowers cutter cost.

Standard Accessories
1. MT-3 with annular cutter holder
2. Hand Drift
3. Pilot Pin 8 x 91 mm and 8 x 112 mm
4. Double Open End Wrench
5. Hex. Key Wrench 2.5mm, 4mm and 6mm
6. Operating Handle (3 pcs)
7. Lifting Handle
8. Carbon Brush
9. Fixed screw
10. Machine Manual

Optional Accessories
1. MT3 with Drill Chuck holder
2. Twist Drill
3. Noss Straight Shank Twist Drill
4. Annular Cutter (one touch or weldon shank)
18mm-60mm (for 35mm or 50mm thickness steel)
5. X-1 Cutting Oil : 2L / per can
6. Safety Chain