Portable Magnetic Base Drilling Machine

• Serves as two modes of cutter that allows loading in a one touch shank or Weldon shank.

• Serves as two types of drilling that allows loading in an annular cutter or change drill duck with adaptor for loading twist drill.

• Arbor support bracket help to align the cutter precisely, which increases cutter and motor life. This design for increase main shaft stability that avoids motor and main shaft vibration.

• Roller bearing design for reduce abrasion. The cutter no need replace frequently, therefore may reduce the expense of replacement, and simultaneously largely lengthens the cutter life.

• Designed with double coil magnetic base, the front coil will start while electricity is entering. It can adjust the central point on work sheet, and simultaneously when one coil burning that still keep another coil to hold work sheet to avoid immediately danger. It is high safety consideration.

• Switch PC board design may put electric current in order and constant the voltage. The stability better than manual type switchboard.

• Light weight, only 15kg.

• Standard Accessories
  1. Pilot Pin 8 x 91 mm
  2. Double Open End Wrench
  3. Hex. Key Wrench 2.5mm,4mm and 6mm
  4. Operating Handle (3 pcs) 
  5. Lifting Handle
  6. Fuse Block
  7. Carbon Brush
  8. Fixed screw
  9. Operation Manual

• Optional Accessories
  1. Annular Cutter (one touch or weldon shank)
      18mm-45mm (for 35mm or 50mm thickness)
  2. Adaptor arbour of drill chuck
  3. Drill Chuck
  4. Twist Drill (Max. 13 mm)
  5. Special Adaptor & Twist Drill 6-12mm
  6. X-1 Cutting Oil : 2L / per can 
  7. Safety Chain

Specifications